RUBBER

EPDM Adhesives

CONTACT ADHESIVE

SPRAY CONTACT ADHESIVE

COVERAGE RATES = 0.5 LTR PER M2 (BOTH SIDES)

1L = 1 to 2 SQM

2.5L = 4 to 5 SQM

5L = 7 to 10 SQM

10L = 15 to 20 SQM

COVERAGE MAY VARY DEPENDING ON SURFACE

SPRAY CONTACT ADHESIVE

COVERAGE RATES = 0.17 LTR PER M2 (BOTH SIDES)

500ML = ??

COVERAGE MAY VARY DEPENDING ON SURFACE

DECK ADHESIVE

SPRAY CONTACT ADHESIVE

COVERAGE RATES = ?? LTR PER M2

Coverage rates of up to 3-4m²per litre

2.5L = 7 to 10 SQM

5L = 15 to 20 SQM

15L = 50 to 60 SQM

SEAM TAPE

70MM

SOLD BY THE METER

COVER TAPE

150MM

SOLD BY THE METER

UNCURED TAPE

225MM

SOLD BY THE METER

PRIMER

0.25L COVERAGE

6.5M X 70MM SEAM TAPE (BOTH SIDES)

6.5 M X 150MM COVER TAPE

4.5M X 225MM UNCURED TAPE

0.5L Coverage

13M X 70MM SEAM TAPE (BOTH SIDES)

13M X 150MM COVER TAPE

9M X 225MM UNCURED TAPE

1L Coverage

26M X 70MM SEAM TAPE (BOTH SIDES)

26M X 50MM COVER TAPE

18 M X 225MM UNCURED TAPE

ADDITIONS

RUBBER

TRIMS, CORNERS AND JOINTS

Black Trims, Corners and Joints

KERB EDGE TRIM

100MM X 2.5M

KERB EDGE TRIM JOINT

100MM

KERB EDGE TRIM EXTERNAL CORNER

100MM

KERB EDGE TRIM INTERNAL CORNER

KERB EDGE TRIM EXTERNAL CORNER

100MM

GUTTER TRIM

KERB EDGE TRIM INTERNAL CORNER

GUTTER TRIM JOINT

75MM X 2.5M

GUTTER TRIM JOINT

KERB EDGE TRIM INTERNAL CORNER

GUTTER TRIM JOINT

75MM

GUTTER TRIM EXTERNAL CORNER

75MM

GUTTER TRIM INTERNAL CORNER

GUTTER TRIM EXTERNAL CORNER

75MM

ADDITIONS

EPDM Ancillaries

70MM SEAM TAPE

225MM UNCURED TAPE

150MM COVER TAPE

70mm EPDM seam tape is utilized to join two pieces of EPDM membrane when completing the roof in a single piece is impractical, such as in the case of an 'L' shaped roof.

150MM COVER TAPE

225MM UNCURED TAPE

150MM COVER TAPE

Designed for use as a cover strip when joining two pieces of membrane without any overlap, where a 70mm splice tape is unsuitable.

225MM UNCURED TAPE

Engineered to shape internal and external corners, awkward features, pipes, penetrations, drain outlets, and any other feature where flexibility and formability are essential. Additionally, 225mm uncured flashing can be utilized to create a cost-effective pipe boot.

RUSS STRIP

ALUMINIUM TERMINATION BAR

RUSS (Reinforced Universal Secure Strip) features pre-applied bonding tape along one edge. It is bonded to the underside of the EPDM using ClassicBond Rubber Primer, eliminating the need to puncture the EPDM membrane during installation.

ALUMINIUM TERMINATION BAR

Aluminium EPDM Termination Bar is to be used in conjunction with Water Cut-a luminium EPDM Termination Bar should be used in conjunction with Water Cut-off Mastic and Lap Sealant to form a waterproof junction on up-stands or where the EPDM membrane joins existing roofing materials, such as felt. The membrane is clamped to the substrate using the Termination Bar.

PIPE BOOT

ALUMINIUM TERMINATION BAR

12MM - 75MM

25MM - 150MM

EPDM pipe boots are employed to establish a waterproof seal between the roof deck and any protruding pipework.

INTERNAL DRAIN WITH LEAF GRATE

DIAMETER OPTIONS

68MM

100MM

110MM

EPDM drain outlets are designed to connect a rainwater downpipe to the EPDM membrane where the drain passes through the roof deck. They fit standard domestic downpipes, 100mm downpipes, and 110mm downpipes.